Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Highland Park, TX
We provide independent Gelco service across Highland Park, TX, and the one thing that sets our Gelco work apart here is fit: most Gelco caps and dampers in this town sit on chimneys built between the 1910s and 1940s, where flue openings are rarely square and brick is soft enough to punish a careless hand. A Gelco cap on a modern modular flue is a drop-in job. On an original Highland Park stack, it’s a fitting job. We sweep, inspect, and re-seat Gelco components on those older chimneys without treating them like a new build, and we hand you a written estimate before any work is booked. Call (833) 769-0219. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Why Highland Park Residents Choose Us for Gelco Service
Gelco chimney and venting components turn up in plenty of North Texas fireplaces, and sweeps who work on them regularly learn the patterns: where the mounting legs loosen first, why a damper pivot seizes, how a mesh screen packs shut on a heavy-burning clay flue. That field familiarity is what we bring to Gelco work in Highland Park.
We’re an independent service provider. Not Gelco-authorized, not affiliated with the manufacturer. That independence matters on a street like Beverly Drive or Lexington Avenue, where the chimney is often original to a Georgian or Tudor house and replacements aren’t on the table. We figure out what the existing assembly needs and fit quality parts that actually match the flue.
Scheduling is straightforward. You get the scope in writing, a flat price per job set by that estimate, and a crew that shows up understanding that the brick it’s about to touch is nearly a century old.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Highland Park
Gelco-style assemblies fail in predictable ways, and in Highland Park the local housing and climate bend those failures toward certain patterns.
- Top-mount caps loosening on soft historic brick. The mounting legs and mesh on a top-mount cap rust and work loose against 1920s – 1940s brick, which doesn’t hold a fastener like modern masonry. Water finds the gap first, then birds.
- Damper plates seizing after a long idle summer. North Texas summers leave a fireplace unused for months. Gelco damper pivots rust shut in that stretch, and the first cool-night fire sends smoke into the room instead of up the flue.
- Spark screens clogging on clay-tile flues. Highland Park homeowners burn real wood, and soot plus creosote cake the mesh on a Gelco cap until draft chokes. A clogged screen quietly strangles the whole chimney.
- Leaks at the cap-and-crown junction. Where galvanized or painted steel meets an old mortar crown, the seal fails. Freeze-thaw cycles and spring storms crack the crown, and the cap interface becomes the entry point for water running down into the stack.
- Non-standard flue openings that never got a proper fit. Original stacks here don’t follow modern modular dimensions, so a cap installed loosely years ago sits cocked, cutting draft and admitting rain around the edges.
Gelco Service in Highland Park: What Local Conditions Mean for Your Equipment
Highland Park’s preservation culture is the fact that reshapes almost every Gelco job here. The Town’s architectural review pushes homeowners to keep original masonry chimneys rather than cap them off or replace them, so along the Park Cities grid you’re rarely fitting a Gelco cap to a clean modern flue. You’re fitting one to an 80 – 100-year-old stack with a flue opening that was laid by hand and never meant to hold a stock steel cap. The same pressure that protects the Tudor, Georgian, and Mediterranean homes has a practical consequence: caps get retrofitted, dampers get repaired rather than rebuilt, and the sweep has to read what the old clay and soft brick will tolerate before touching either. Aggressive rotary sweeping or harsh chemical cleaners will crumble that brick. Hand-brushing and gentle methods aren’t a preference on these chimneys. They’re the only way to clean them without causing the damage the homeowner was trying to prevent.
Gelco Models & Products We Service in Highland Park
We work on the Gelco components that actually live on Highland Park chimneys: top-mount multi-flue caps, stainless single-flue caps with mesh spark screens, replacement firebox dampers and damper assemblies, and fireplace inserts and vent kits for gas and wood. Each one fails differently, and each one needs to match the chimney in front of us.
When a direct-fit Gelco replacement exists and the flue dimensions support it, that’s the clean answer. When they don’t, we fit quality aftermarket stainless sized to the flue and suited to the house’s look. Caps and dampers are almost always worth repairing or replacing rather than rebuilding a sound historic stack. A spalling crown or crumbling clay tile is different. That’s masonry, quoted as masonry, not a parts swap.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Highland Park
Every price we quote is an estimate, and the written estimate sets the final number. What drives cost on a Gelco job here is usually the chimney’s age and condition rather than the part itself: reaching and fitting a cap on an irregular old stack, freeing a seized damper, or discovering that the cap interface was leaking because the crown underneath had cracked.
- Annual sweep with inspection: quoted per job after we see the flue
- Cap replacement, including fit to a non-standard historic opening: quoted per job
- Crown repair where the cap interface is leaking: quoted per job
The estimate is free, and it comes with camera evidence so you can see the condition yourself. Call (833) 769-0219 for an exact quote.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Highland Park
Yes, and the method matters more than the equipment. Those clay tiles and the soft brick around them can’t take aggressive rotary sweeping or harsh chemical cleaners without crumbling, so we hand-brush the flue and work carefully around the Gelco cap and damper instead of forcing them. A typical job here starts with smoke backing up or a drafty fireplace after summer disuse, and the sweep finds a seized damper and a screen packed with soot on the original clay-tile flue. The fix is usually a gentle hand-brush sweep, freeing or replacing the damper, and re-securing or swapping the cap, plus a look at the mortar crown. Call (833) 769-0219 for an exact quote – estimates are free.
It can, because Highland Park’s review and preservation standards shape what’s acceptable on a visible chimney, which is why so many homeowners here keep the original stack instead of replacing it. That makes cap selection a fit-and-appearance question as much as a functional one. We size the cap to your actual flue opening and match the look to the house. Call (833) 769-0219 and we’ll walk through it on a free estimate.
Because months of disuse let the pivot rust and seize. North Texas’s long, mild-to-hot summers mean the fireplace sits idle, and a Gelco damper plate that hasn’t moved since spring often won’t budge by the first cold night. We free or replace it and check the cap screen at the same time, since soot buildup there chokes draft too. Call (833) 769-0219 to book a sweep before burning season.
Usually yes, but it has to be fitted rather than dropped on. Original stacks in Highland Park were laid by hand and rarely match modern modular dimensions, so a multi-flue cap needs measuring against the real opening and securing so it doesn’t sit cocked. When a direct-fit Gelco cap suits the flue, we use it. When it doesn’t, we fit quality stainless sized to the stack. Call (833) 769-0219 for an exact quote.
Yes. Plenty of remodels and infill here add gas fireplaces and inserts alongside the historic stacks, so one property can need traditional sweeping on the original clay flue and vent servicing on the gas side. We handle both under one company so you’re not coordinating two contractors. Call (833) 769-0219 – estimates are free.
Service Areas Near Highland Park
We also serve homeowners in Highland Park and the surrounding communities, including Preston Hollow, East Dallas, Lakewood, Prestonwood, Lochwood, Forest Hills, and Kessler Park. If you’re nearby and need Gelco work, get in touch. Our technicians have up to 9 years of experience, and we bring the same care to every chimney we touch.
Book Your Gelco Service in Highland Park Today
If your Gelco cap is loose, your damper won’t move, or you just want the flue checked before burning season, call (833) 769-0219 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’ll book your sweep and give you the scope in writing before any work starts. Find more on our Gelco service.
Written by the team at Chimney Sweep Preston Hollow.