Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Lake Highlands
If your Lake Highlands fireplace backs up smoke on the first cold night, or you’ve spotted a brown ring on the ceiling near the chimney chase, the problem usually starts at the top of the stack, not in the firebox. We handle cap and crown work on the mid-century ranches that make up most of this neighborhood, and we do it with camera evidence in hand before anything gets recommended. Lake Highlands chimneys are older than most of the people living in them, and they fail in predictable ways once the mortar crown cracks and water finds the flue. Call (833) 769-0219. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Why Lake Highlands Homeowners Call Chimney Sweep Preston Hollow for Chimney Cap & Crown
We’re a full-service chimney specialist, not a generalist with a brush and a ladder. That matters in Lake Highlands, where the work almost always involves original masonry, clay-tile flues, and cast crowns that are showing their age. A cap-and-crown call here is rarely just screwing down a lid. It’s diagnosing why the crown failed, whether the flue behind it is sound, and what a correct repair looks like on a house built somewhere between 1955 and 1975.
Our technicians have up to 9 years of experience, and they see the same December pattern across this part of Dallas: fireplaces dormant since February get lit on the first hard blue norther, and that’s when cracked flue tiles, glazed creosote, and a rusted-shut damper all show up at once. We know the difference between a Lake Highlands ranch with a cast masonry crown and the later infill and prefab insert conversions scattered through the neighborhood. That difference changes the repair.
You also get one company from inspection through repair. No handoff to a separate crown contractor, no finger-pointing when the cap doesn’t sit right on a crown someone else poured. We work with professional-grade components from Gelco, Famco, and Olympia Chimney, and we stand behind the install.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Lake Highlands
These are the four jobs we run most often on Lake Highlands homes, and the order reflects what we actually find when we get on the roof.
Cap Installation
A correctly sized cap keeps out the rain, the leaves, and the squirrels that pack uncapped flues through the long off-season under White Rock Lake’s tree canopy. We measure the flue opening, fit the cap with snug flashing, and make sure the mesh won’t choke the draft on a fireplace you actually use. On a Lake Highlands ranch, a stainless multi-flue cap over a shared stack is often the right answer where a single-flue lid would leave the second flue open.

Cap Replacement
Plenty of caps on Lake Highlands roofs were installed decades ago and have rusted through, lost their screen, or were sized wrong from the start. A cap that’s too small lets water in at the flashing. One that’s too tall or too tight starves the fire for air. We pull the old unit, check the crown underneath for damage the failed cap was hiding, and fit a replacement that matches the actual flue count and dimensions.

Crown Repair
The cast masonry crown is where most Lake Highlands water intrusion starts. Summer heat and occasional hard freezes crack and spall the mortar, and water tracks down into the smoke chamber, rusts the damper, and sits against the clay tile. We rebuild a failed crown with proper slope so it sheds water instead of pooling it. This is the repair that prevents the expensive liner work later.

Crown Coating
When the crown is cracked but still structurally sound, a coating reseals it without a full rebuild. We use a flexible coating that moves with North Texas temperature swings rather than cracking again the next summer. Crown coating is the lower-cost path, and we’ll tell you plainly when it’s the right call versus when the crown has gone too far and needs to come off.
You can see the full scope of what we handle on our Chimney Cap & Crown page.
Trusted Brands We Service in Lake Highlands
We install and service cap and crown components from Gelco, Famco, and Olympia Chimney, and when a crown repair turns into flue work we bring in HeatShield for resurfacing or DuraFlex for a flexible reline. We don’t stock parts on a truck or claim a warehouse full of inventory. What we do is specify the right component for your stack and get it ordered, which usually means a short turnaround rather than a long wait. Naming the brand matters because a generic cap from a big-box shelf won’t last a decade on a Lake Highlands roof, and the wrong crown mortar will crack again within a few winters.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Lake Highlands Homes
- Spalled and cracked cast crowns on 1955 – 1975 ranches. The original mortar crown takes decades of summer heat and hard freezes, then cracks. Once it cracks, water tracks down into the smoke chamber and rusts the damper shut.
- Uncapped clay-tile flues packed with leaf litter and squirrel nests. With the tree canopy overhead and the flues open all off-season, debris plugs the stack. Draft chokes on the first cold snap, and smoke backs into the room.
- Deferred crown and mortar repair breeding liner damage. Water sitting against the clay tile cracks it, and the creosote that builds up behind the damage glazes into first- or second-degree buildup you never see until a camera goes down the flue.
- Wrong-size caps and failed flashing from earlier installs. A cap installed without checking the crown underneath hides the crack that’s already letting water in. We pull it, inspect, and correct both.
Pricing for Chimney Cap & Crown in Lake Highlands, TX
Typical Lake Highlands pricing runs about $250 – $550 for a standard single-flue cap installed with flashing, and $450 – $900 for a multi-flue or custom cap sized to an older ranch stack. Crown coating usually lands around $350 – $700 depending on crown size and access. A full crown rebuild runs $600 – $1,400. Those ranges reflect the older masonry and larger shared stacks common here, not a new-construction install. The written estimate sets the final price, and there’s no charge for the estimate itself. If the camera shows the crown can safely wait a season, we’ll say so and put it in writing.
We Also Serve Cities Near Lake Highlands
We work across this part of Dallas and the surrounding communities, including Forest Hills, Lochwood, University Park, and Lakewood. If you’re just outside Lake Highlands, the same cap and crown work applies. Call and we’ll confirm coverage for your address.
Serving Lake Highlands, TX – Our Local Coverage Area
We serve Lake Highlands and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Lake Highlands
Most original 1960s crowns in Lake Highlands can be repaired rather than replaced, but only after a camera inspection tells us whether the damage is surface-level or structural. A cracked but sound crown takes a coating. A crown that’s spalled down to the flue tile or lost its slope needs a rebuild. We show you the footage on-screen and let you see the difference before you decide. Call (833) 769-0219 for a free estimate.
Smoke backing into the room on the first cold night usually means the flue is blocked or the draft is compromised from months of sitting open. In Lake Highlands, leaf litter and squirrel nesting pack uncapped flues through the off-season, and a cracked crown lets water in that rusts the damper. A Level 2 camera inspection finds the actual cause rather than guessing. Call (833) 769-0219 to book one.
Yes, and the fact that neighboring ranches are uncapped is a reason to cap yours, not skip it. Debris and nesting animals move to whatever flue is open, and an uncapped stack lets rain straight into the smoke chamber. A cap is the cheapest water-intrusion protection you can put on a Lake Highlands chimney. Call (833) 769-0219 for a free estimate.
A crown coating reseals a cracked but structurally sound crown, while a full crown repair rebuilds a crown that has spalled, lost its slope, or separated from the flue. Coating runs roughly $350 – $700. A rebuild runs $600 – $1,400. We recommend the coating only when the camera confirms the crown can hold it. Call (833) 769-0219 and we’ll tell you which one your crown needs.
An annual inspection is still the right schedule even for light use, because the damage we find in Lake Highlands is water-driven, not creosote-driven. A crown that cracks in July doesn’t wait for you to light a fire in December. One inspection a year catches it early. Call (833) 769-0219 to book yours before the cold-snap rush.
Ready to get your Lake Highlands chimney capped and crowned right? Call (833) 769-0219 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Nothing gets recommended until the camera footage is on the table in front of you.
Written by the team at Chimney Sweep Preston Hollow.