Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Why Preston Hollow Homeowners Choose Gelco Chimney Cleaning
Chimney Sweep Preston Hollow provides independent Gelco chimney cleaning, repair and installation service across Preston Hollow. We service Gelco fireboxes, dampers, caps and gas-log sets as an independent provider, with no affiliation to the manufacturer, so the work is judged against what your chimney actually needs. Our technicians have up to 9 years of experience, and they work on Gelco-built fireboxes and Gelco components often enough to recognize the symptoms before pulling a single tool from the case. Call (833) 769-0219 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Chimney Sweep Preston Hollow for Your Gelco Chimney Cleaning?
Gelco components have been part of North Texas fireplace construction for decades, and Preston Hollow’s 1950s through 1990s housing stock holds a large share of them. That means the technicians who arrive at your door have handled the same cast damper frames, louvered grilles and top-mount cap assemblies many times before. They know which parts seize, which ones rust through, and which ones still have years left in them.
On parts, we fit quality components that match your Gelco equipment. Where an exact-fit part is still available, that’s the first choice. Where it isn’t, a well-made aftermarket damper frame or a stainless multi-flue cap often outperforms the original on an older unit, and we’ll say so plainly rather than pushing a part that won’t last.
Warranty-safe service matters too. We service Gelco equipment without making claims about manufacturer authorization, and we document what we find with camera evidence and a written report so you have a record of the condition of your firebox, damper and flue. Our technicians have up to 9 years of experience working on this equipment, and that experience is what keeps a repair from turning into a re-do.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Fix in Preston Hollow
Gelco equipment has known failure patterns, and most of them show up in Preston Hollow’s older homes long before a homeowner realizes something is wrong. Here are the five we see most often.
- Seized or warped damper frames. The cast-iron or steel damper frame on an older Gelco firebox loses its seal over time. The frame can warp, seize partway open, or lose its pivot pin entirely, so the damper never seats fully. When that happens, the fireplace drafts cold air into the room even when it’s idle, and you feel a draft on the back of your neck on a mild winter evening.
- Cracked louvered grilles and inner firebox walls. On a Gelco heat-circulating fireplace, the louvered grille and the inner steel walls take the full heat load. Over years of use, the steel can crack or burn through at the baffle. Once it does, heat and smoke bypass into the wall cavity instead of the flue, and that’s a fire-risk condition that needs attention before the next fire is lit.
- Sooted gas-log burners and ceramic logs. A Gelco gas-log insert or burner set that runs with out-of-adjustment orifices or a mis-set air shutter produces a lazy yellow flame. That flame coats the firebox walls, the logs and the glass with black carbon soot, and it’s a sign the gas is not burning cleanly. It’s worth having the burner checked rather than simply wiping the soot away.
- Rusted, seized multi-flue dampers and caps. Original Gelco top-mount multi-flue damper and cap assemblies rust at the hinge over time. When the hinge seizes, the flues stay permanently open to rain and downdraft, which lets water into the flue and cold air into the house. A stuck-open cap is one of the quieter causes of water damage in a Preston Hollow chimney.
- Creosote glazing on the flue walls. Preston Hollow’s humid spring and fall conditions encourage creosote to glaze into a hard, tar-like layer that a standard brush won’t touch. Glazed creosote is the fuel that feeds a chimney fire, so it’s the first thing a sweep checks after a season of burning.
Gelco Parts & Our Repair-vs-Replace Approach
For Gelco dampers, caps and gas-log components, exact-fit parts are the better choice when they’re still available. When they aren’t, a quality aftermarket damper frame or a stainless multi-flue cap is a sound substitute, and on older units it’s often the sturdier one. We don’t claim to stock OEM or genuine Gelco parts; we source quality parts that fit your equipment and stand behind the fit.
The repair-or-replace call comes down to the condition of the steel and the masonry around it. A cracked damper frame or a sooted gas-log burner is a repair. A firebox cracked through the steel, or masonry spalling badly around it, is a different conversation, and honest advice leans toward a rebuild or an insert conversion rather than a patch that won’t hold. We show you the camera footage and the photos so you can see what we see before you decide. Call (833) 769-0219 for a free estimate and a straight answer.
Our Gelco Service Process – Step by Step
- 1
Diagnosis. We inspect the firebox, damper, grilles and flue with a camera, and check the cap and crown from the roofline. On a Gelco heat-circulating unit, that means looking at the baffle and the inner steel walls, not just the firebox floor.
- 2
Repair or install. We work the damper free or replace the frame, clean soot and creosote off the steel walls and grilles, and fit a cap or crown component that seals the flue properly. Gas-log burners get their orifices and air shutter checked and adjusted.
- 3
Test. We test the damper for a full seat, check the draft, and confirm the cap is venting correctly. A repaired damper that’s fighting a downdraft isn’t a repair yet.
- 4
Warranty and documentation. We leave you with a written report and photos of the condition we found and the work we did, so the repair is on record and any future service has a baseline to work from.
See the difference
Before
After
Before
After
Before
AfterGelco Products We Service & Install in Preston Hollow
We service the full range of Gelco fireplace and chimney equipment found in Preston Hollow homes. That includes the Gelco steel heat-circulating fireplace with its louvered grille, the Gelco masonry fireplace with a factory steel firebox and cast damper frame, Gelco gas-log fireplace inserts and burner sets, and Gelco multi-flue top-mount damper and cap assemblies.
The sub-services that come up most on Gelco equipment are damper repair, fireplace cleaning and cap replacement. Each one addresses a specific failure point on the system, and each one is worth doing before the next burning season rather than after. Preston Hollow’s freeze-thaw cycles and intense summer heat are hard on clay flue tiles and mortar crowns, so the cap and crown work is a routine part of keeping a Gelco system sound.
We Also Service These Brands
Gelco is one part of the work. We also install and service DuraFlex flexible liner systems for relining jobs, and we use HeatShield for non-invasive flue resurfacing when a liner is damaged but the surrounding masonry is still sound. Working across brands means you don’t have to coordinate a separate contractor for each component of your chimney system.
FAQs – Gelco Chimney Cleaning Service in Preston Hollow
No. We’re an independent service provider and have no affiliation with or authorization from Gelco. That independence is the point: the advice you get is based on what your chimney actually needs, not on a manufacturer script. Call (833) 769-0219 with questions about your Gelco equipment.
Yes. We fit quality parts that match your Gelco equipment, using exact-fit components when they’re available and well-made aftermarket damper frames or stainless multi-flue caps when they aren’t. We don’t claim to stock OEM or genuine Gelco parts. Call (833) 769-0219 to talk through what your unit needs.
Most Gelco chimney cleaning and damper work is a single visit of a few hours. A cap replacement or a multi-flue damper repair is usually done in one appointment, while a firebox rebuild or insert conversion takes longer and gets scheduled separately. Call (833) 769-0219 for a free estimate and a realistic timeline.
We cover Gelco heat-circulating fireplaces with louvered grilles, masonry fireplaces with factory steel fireboxes and cast damper frames, gas-log inserts and burner sets, and multi-flue top-mount damper and cap assemblies. If you’re not sure which one you have, describe what you see and we’ll help you identify it. Call (833) 769-0219.
Servicing your Gelco equipment with an independent provider does not, by itself, void your warranty. What matters is that the work is done with quality parts that fit and that you keep a record of it, which is why we leave you with a written report and photos. Check your own warranty terms for anything specific. Call (833) 769-0219 with questions.
Usually, yes. A cast damper frame that has seized partway open or lost its pivot pin won’t seat fully, so the flue stays open and cold air comes down through the firebox and out the grilles. A sweep can work the damper free or replace the frame, then check the cap and crown so the repaired damper isn’t fighting a downdraft. Call (833) 769-0219 for a free estimate.
Sometimes. If the steel is sound and the damage is in the flue, a HeatShield resurfacing or a DuraFlex liner can restore the flue without tearing out the firebox. If the inner steel is cracked through at the baffle, a reline won’t fix it and honest advice points to a rebuild or insert conversion. Call (833) 769-0219 for an inspection and a clear answer.
Black soot on a Gelco gas-log set usually means the gas isn’t burning cleanly, which points to out-of-adjustment orifices or an air shutter that’s set wrong. It’s worth having the burner checked rather than wiping the soot away, since a lazy yellow flame will keep coating the firebox until the adjustment is corrected. Call (833) 769-0219 to schedule a check.
It does. A cap that’s stuck open leaves your flues exposed to rain and downdraft, which lets water into the flue and cold air into the house. A rusted hinge can often be freed, and if not, a stainless multi-flue cap replacement seals it properly. Call (833) 769-0219 for a free estimate.
Once a year is the usual rule for a wood-burning Gelco fireplace, and more often if you burn heavily or notice glazed creosote on the flue walls. Preston Hollow’s humid spring and fall conditions make glazing more likely, so an annual sweep and inspection catches it early. Call (833) 769-0219 to book yours.
Pricing is set per job by the written estimate, and the estimate is free. Cost depends on how many flues your Gelco system has, the condition of the firebox and damper, and whether cap or crown work is needed. We show you camera footage and photos before recommending anything, and we’ll tell you plainly when work can safely wait. Call (833) 769-0219 for an exact quote.
Book Your Gelco Service in Preston Hollow, TX
Whether your Gelco damper is seized, your heat-circulating grilles are blowing cold air, or your multi-flue cap is rusted open, one call gets it looked at by a technician who knows the equipment. The estimate is free and the price is set by the written estimate. Call (833) 769-0219. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Preston Hollow.