Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Preston Hollow?
Chimney liner and rebuild work in Preston Hollow typically runs from about $450 for a HeatShield resurfacing on a sound flue up to $18,000 or more for a full masonry rebuild with a new liner system. Most homeowners here land in the middle, spending roughly $2,400 to $6,500 on a stainless flexible reline or a partial rebuild with crown and cap work bundled in. The written estimate sets the final price, and the ranges below are typical for the Preston Hollow market in 2026, not a quote.
You don’t need to sort out which problem you have before you call. Whether the flue is cracked but still standing or the chimney has lost mortar and is pulling away from the roofline, we look at the whole system, then tell you what’s actually failing and what it costs to fix it. Call (833) 769-0219. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Key Takeaways
- HeatShield flue resurfacing: roughly $450 to $1,600, the least invasive way to restore many clay-lined flues.
- DuraFlex stainless flexible reline: roughly $1,800 to $5,200 depending on chimney height and liner size.
- Masonry rebuild (upper portion): roughly $3,500 to $12,000.
- Full chimney rebuild from the roofline down: roughly $9,000 to $18,000+.
- Cap, crown, and damper components using Gelco, Famco, and Copperfield hardware: roughly $250 to $1,900 as line items.
- Our technicians have up to 9 years of experience, and the estimate is free.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the work breaks down line by line for a Preston Hollow home. Each figure is a typical range for that item; the total depends on how many items your chimney needs.
| Work item | Typical 2026 range (Preston Hollow) |
|---|---|
| Level 1 or Level 2 inspection (credited toward a repair we recommend) | $0 to $175 |
| HeatShield flue resurfacing (single flue) | $450 to $1,600 |
| Spot repair of cracks with refractory mortar | $300 to $900 |
| DuraFlex stainless flexible reline, medium flue | $1,800 to $3,400 |
| DuraFlex reline, oversized or tall flue needing insulation wrap | $2,900 to $5,200 |
| New Gelco or Famco chimney cap (single flue) | $250 to $700 |
| Multi-flue custom cap assembly (Copperfield) | $800 to $1,900 |
| Crown rebuild or resurfacing with a proper overhang | $600 to $1,700 |
| Top-sealing damper installation | $350 to $850 |
| Rebuild of the upper chimney (above the roofline) | $3,500 to $12,000 |
| Full masonry rebuild down to the roofline base | $9,000 to $18,000+ |
| Rebuild plus liner plus cap plus crown, combined | $11,000 to $22,000 |
The biggest driver is whether the flue is sound or has to be lined from scratch. A clay flue with minor joint erosion is a resurfacing job; a flue that’s been opened for a fireplace insert or has cracked tile throughout needs a full reline, and that price climbs with height and diameter. On the masonry side, the cost tracks how far the rebuild extends. Repointing mortar, replacing a few spalled bricks, and a new crown is a very different job from pulling the whole stack down to solid courses and rebuilding it back to the proper height.
Your chimney is a system: cap, crown, liner, firebox, and damper. When we quote, we price the whole system so you see how a crown rebuild and a cap assembly connect to a failing liner. That’s how we catch the small cracks before they become structural problems, and it’s why you won’t need a second contractor to coordinate with. For the full scope of what we cover, see our Chimney Sweep Preston Hollow services.
What Affects Chimney Liner & Rebuild Pricing in Preston Hollow
Every home has a slightly different chimney, and a few local factors move the number more than others.
- Roof style and height. Preston Hollow’s large ranch homes and mid-century gable-roof houses often have tall chimneys set back from the ridge, and access matters. A tall stack needs more scaffolding or a taller ladder setup, which adds labor. Steep-pitch roofs and decorative masonry add time too.
- Flue condition. A straight, sound clay flue is easy to reline. A flue with offsets, past inserts, or heat-damaged tile in a house where the fireplace has been used heavily over decades takes more prep work. A clean flue reduces creosote buildup, the leading cause of chimney fires, and it also tells us what the liner really looks like inside.
- Liner material and brand. We use DuraFlex flexible stainless liners because they’re specified widely by certified chimney professionals and hold up to flue gas temperature swings. Undersized hardware or a mismatched cap will cost you more in repairs than it saves up front.
- Masonry rebuild scope. The line between “partial” and “full” rebuild changes the price by thousands. We test the masonry course by course, and we rebuild only what’s failing. If the crown has cracked or water has gotten in, that’s the number that rises fastest.
- Water intrusion versus fire damage. Most rebuilds in this market trace back to water, not fire. A cracked crown or a missing or damaged cap lets rain into the flue; over time it swells mortar joints and spalls brick. Gelco and Famco crown and cap components are the fix we’d reach for, because they seal the source.
- Fireplace type. A pre-fab fireplace, a masonry firebox, and a wood stove insert each need a different liner pass and damper setup. A top-sealing damper is often the smart add-on to a new liner so the system seals when the fireplace isn’t in use.
One thing we won’t do is price by square foot of roof or by guesswork. We measure the flue, photograph the masonry, and put the numbers in writing.
How to Save on Chimney Liner & Rebuild
Quality work isn’t cheap, and cutting corners on a liner or a rebuild is how homeowners end up paying twice. That said, there are honest ways to keep the number down.
- Get a real inspection first. A proper Level 2 inspection catches what’s actually failing. Sometimes the flue is sound and you only need a crown and cap, which is a fraction of a rebuild. An inspection that saves you a rebuild pays for itself many times over.
- Fix water intrusion before it spreads. A new cap and a sealed crown early on prevents the mortar erosion that eventually forces a rebuild. That’s the single biggest cost-avoidance move on a Preston Hollow roof.
- Bundle components in one visit. When the liner, crown, cap, and damper are done together, you’re not paying for setup and access twice. Since we’re a full-service chimney specialist, everything from sweep to structural repair stays under one company, with no handoffs and no pointing fingers between contractors.
- Choose resurfacing when the flue allows it. HeatShield genuinely restores certain compromised flues that a sweep-only company would have to refuse. When resurfacing is a real option, it saves the cost of a full reline.
- Ask for a written scope, not a lump bid. Comparing itemized estimates stops anyone from overpainting and underrepairing. Get the scope in writing so you can see what’s included.
The estimate is free, and the price is set per job by that written estimate. If the answer is a simple repair, we’ll tell you that instead of building a rebuild into the quote. For the full deep-dive on relining and structural work, read our chimney liner & rebuild guide.
When Repair Costs Less Than Replacement
Homeowners often ask whether it’s cheaper to repair or to replace. The answer comes down to the flue’s integrity. If the clay tile is cracked through or missing in sections, resurfacing and spot repair won’t hold, and a DuraFlex reline is the correct fix. If the masonry above the roofline is solid and the crown is the only failure, a targeted repair is far cheaper than a rebuild. We inspect first and price the smallest correct fix, then lay out what the alternative costs so you’re deciding with numbers instead of fear.
What a Typical Preston Hollow Liner & Rebuild Job Involves
Here’s the general flow of the work, so you know what you’re paying for. We start with a Level 2 inspection: camera down the flue, photographs of the masonry, crown, and cap. From there we give you a written scope with the line items above. If it’s a resurface or reline, we clean and prep the flue, then apply the HeatShield or install the DuraFlex liner to the size and rating your heating appliance needs. If it’s a rebuild, we take down failed masonry course by course, rebuild the stack to the proper height, form a new crown with a correct overhang, and cap it with Gelco, Famco, or Copperfield hardware as the chimney calls for. Everything is done by trained professionals. We never hand a stage off to another contractor.
Some of this work is genuinely hazardous. Rebuilding above the roofline means height work and heavy masonry, and anything that touches the gas lines or electrical wiring of a nearby appliance belongs in licensed hands. Liner work requires working inside a confined flue with special tools. We handle these tasks with the proper equipment and safeguards, and we’d steer any homeowner away from attempting them alone. That’s a professional’s job.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney reline cost in Preston Hollow?
A typical DuraFlex stainless flexible reline in Preston Hollow runs about $1,800 to $5,200, with most jobs in the $2,400 to $3,400 range. The price climbs for a tall chimney, an oversized flue, or one that needs insulation wrap. A HeatShield resurfacing instead of a full reline can run $450 to $1,600 when the flue allows it. Call (833) 769-0219 for a free estimate so you know which of the two your chimney actually needs.
Is it cheaper to repair or replace a chimney liner?
Many repairs are cheaper than replacement, and some aren’t. A flue with minor joint erosion is a $450 to $1,600 resurfacing job; a flue with cracked-through tile needs a $1,800 to $5,200 reline. Choosing the repair when a liner is genuinely failing leads to a much more expensive rebuild later, which is why we inspect before recommending. Call (833) 769-0219 and we’ll tell you plainly which side of that line you’re on – the estimate is free.
How much does a chimney rebuild cost in Preston Hollow?
A rebuild of the upper chimney above the roofline typically runs $3,500 to $12,000, and a full rebuild down to the roofline base runs $9,000 to $18,000 or more. Bundling a rebuild with a new liner, crown, and cap together usually lands in the $11,000 to $22,000 range. The deciding factor is how far the failed masonry extends, which we determine by testing the courses. Call (833) 769-0219 to schedule the inspection that sets the real number.
Can I get a chimney liner or rebuild done the same day?
Resurfacing and small repairs are often same-day jobs; a full reline or rebuild typically takes longer because it’s a multi-stage job. We’ll tell you the expected timeline in writing so you can plan. Call (833) 769-0219. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, so you can get on the schedule quickly.
How much does a chimney cap and crown cost?
A new Gelco or Famco chimney cap for a single flue runs about $250 to $700, and crown rebuilding or resurfacing runs $600 to $1,700. A custom multi-flue Copperfield cap assembly is typically $800 to $1,900. Since the crown and cap are the #1 source of water intrusion damage, this work protects the liner and rebuild you’ve already paid for. Call (833) 769-0219 for a free estimate on sealing the top of your chimney.
Do you work on the whole chimney, or just the liner?
We service the whole system: sweep, inspection, cap and crown, fireplace repair, and structural chimney repair, all in one company. If your flue needs resurfacing, we use HeatShield; for a full reline, DuraFlex; for masonry and cap and crown components, Gelco, Famco, Olympia Chimney, and Copperfield. That single-company accountability is why homeowners don’t have to juggle multiple contractors. Call (833) 769-0219 and describe what you’re seeing; we’ll point you to the right service.
Call Us for Your Free Chimney Estimate
Liner and rebuild work is a decision to make with real numbers in front of you, not a guess. Whether you’re facing a cracked flue, a mortar-sick chimney, or just water getting in past a failed cap, we’ll inspect the system, explain what’s failing, and quote the fix in writing. Call (833) 769-0219. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday; a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. The estimate is free.
Pricing reflects the Preston Hollow market as of 2026. Chimney Sweep Preston Hollow offers free estimates – call (833) 769-0219.
Written by the team at Chimney Sweep Preston Hollow.
What Our Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Henry Chen"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Aisha Bryant"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Carrie Mercer