Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Forest Hills
If your Forest Hills home has an open flue, you already know the drill: leaves in the firebox, a gritty smell when the weather turns, and something scratching above the damper at night. We install and repair chimney caps and crowns for Forest Hills homeowners, and we treat the cap as the part of the chimney that protects everything below it. Our technicians have up to 9 years of experience, and we bring cameras and photos so you can see the condition of your own flue before anyone recommends a thing. Call (833) 769-0219 for a free estimate.
Why Forest Hills Homeowners Call Chimney Sweep Preston Hollow for Chimney Cap & Crown
Forest Hills is an established, heavily wooded neighborhood, and that shapes what we find on caps and crowns here more than anything else. Mature pecans and oaks drop twigs, seed pods, and leaves onto roofs all season, and the neighborhood’s squirrels and raccoons look at an uncapped flue the way you’d look at an open attic hatch. Add those conditions to 1950s – 70s brick ranches with original clay-tile flues, and you get a set of problems most sweep-only outfits aren’t equipped to solve in one visit.
That’s the reason homeowners here call us back. We cover the full chimney system in one company – sweep, inspection, cap and crown, fireplace repair, and structural chimney repair – so there’s no handoff between a cleaner who finds a problem and a mason who never sees the camera footage. We work with professional-grade components from Gelco and Famco on cap and crown work, and we carry HeatShield and DuraFlex for the liner issues those mid-century flues often turn up.
We’re straight with Forest Hills customers about what needs doing now and what can safely wait. Nothing gets recommended without camera evidence you can look at yourself – on a screen, in your own living room, before you agree to anything.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Forest Hills
The cap and the crown do different jobs. The cap keeps wildlife and weather out of the flue; the crown is the concrete or mortar cap on top of the masonry that sheds water away from the stack. We service both, and we look at them together because a failed crown and a missing cap usually show up in the same inspection.
Custom Cap
Stock caps are sized for a standard flue, and Forest Hills chimneys often aren’t standard. Custom caps get built to your actual flue dimensions, with mesh sized to keep out the squirrels and raccoons that den in uncapped flues along the greenbelt lots. We use Gelco components because they hold up to North Texas sun and hail without the mesh rusting out in a few seasons.

Crown Repair
Most of the crowns we repair in Forest Hills are original to the house – 1950s through 1970s mortar that’s been through decades of hot summers and mild winters. That heat cycling causes spalling, the flaking and cracking that lets water track down into the smoke chamber. We rebuild the crown with a proper slope so water runs off the edge instead of pooling at the flue.

Crown Coating
When a crown is cracked but structurally sound, coating can extend its life without a full rebuild. We use a flexible coating that bridges hairline cracks and moves with the masonry through the temperature swings. It’s a good option for crowns that are checked but not yet failing.

Cap Replacement
First-time buyers sometimes inherit a thin aftermarket cap that was never sized right. Those back out of the masonry within a season, or the mesh fails and the wildlife gets in anyway. We replace them with a properly seated cap, and we check the flue while we’re up there – a cap that failed usually means debris got in.
Trusted Brands We Service in Forest Hills
Cap and crown work is structural, so the materials matter. We install caps using Gelco and Famco components, both recognized professional-grade lines specified by chimney professionals across the country. When a crown or cap inspection turns up liner damage – common on original clay-tile flues in Forest Hills – we have HeatShield for flue resurfacing and DuraFlex flexible liner systems for relining. That matters because it means we don’t have to turn away damaged flue work and send you hunting for a second contractor. We don’t stock parts, so turnaround depends on the materials your job needs; we’ll tell you upfront what we’re ordering and when it’s expected.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Forest Hills Homes
Here’s what comes up most often on Forest Hills roofs, especially on the older brick ranches:
- Spalled mid-century crowns. Original mortar crowns crack and flake from North Texas heat cycling, letting water into the smoke chamber. By the time you see a stain on the ceiling, water has usually been tracking down for a while.
- Animal nesting in uncapped flues. Squirrels and raccoons den in open flues, and their nesting debris gets dragged down against the clay-tile liner. The result is a blocked draft, a smell in the house, and a flue that can’t vent properly.
- Cracked clay-tile liners. The 1950s – 70s flues in this neighborhood were built with clay tiles that crack over decades. A camera inspection is the only way to know for sure whether the tiles are intact.
- Undersized aftermarket caps. Thin caps sold to first-time buyers often don’t survive a season. They fail to keep out wildlife and back out of the masonry, which puts you right back where you started.
Pricing for Chimney Cap & Crown in Forest Hills, TX
Chimney cap and crown work in Forest Hills typically runs in the ranges below. These are estimates for the local market – the written estimate you get before any work is booked sets the final price.
- Standard cap installation: typically $250 – $550, depending on flue size and cap type
- Custom or multi-flue cap: typically $450 – $1,200, based on number of flues and dimensions
- Cap replacement: typically $250 – $600, including removal of the failed cap
- Crown repair: typically $400 – $1,200, depending on how much of the crown needs rebuilding
- Crown coating: typically $300 – $700 for a checked but structurally sound crown
What moves the number most is access (roof pitch and height), whether the crown needs a full rebuild versus a coating, and whether the inspection turns up liner damage. Estimates are free. If the camera shows something that can safely wait, we’ll tell you that too.
We Also Serve Cities Near Forest Hills
We serve homeowners in Forest Hills and the surrounding neighborhoods, including Lochwood, Lakewood, Lake Highlands, and East Dallas. A lot of the housing stock is similar – mid-century brick with original masonry fireplaces – so the same camera-first approach applies. If you’re on the edge of Forest Hills and aren’t sure we cover your street, call and we’ll confirm. Our chimney cap & crown team handles both the inspection and the repair, so nothing gets lost between visits.
Serving Forest Hills, TX – Our Local Coverage Area
We serve Forest Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Forest Hills
In Forest Hills, the cap is mostly a wildlife barrier, not a rain guard. Squirrels and raccoons routinely den in uncapped flues along the greenbelt lots, and their nesting debris gets packed against a clay-tile liner that was never designed to carry it. That’s why many cap calls here start as animal-nest removal before a cap can even be sized and seated. Call (833) 769-0219 for an estimate.
No – a cap without an inspection can seal in a problem you can’t see. The clay tiles in 1960s Forest Hills flues crack over time, and nesting debris sitting against a cracked tile hides the damage. A camera inspection before the cap goes on is the only way to know whether the flue is sound. Call (833) 769-0219 – estimates are free.
A spalled crown looks flaky and cracked at the edges, often with chunks missing and a flat or dished top that pools water instead of shedding it. On Forest Hills ranches, the original mortar crowns are usually the ones showing it after decades of hot summers and mild winters. If you see flaking up top, the crown is letting water into the smoke chamber. Call (833) 769-0219 for a look.
Yes – light burning can still build hardened creosote when the fireplace sits idle for months between seasons. In Forest Hills’ climate, soot and creosote harden during the long hot stretch and glaze onto the flue, and that glazed creosote is the hardest to remove. An inspection with a camera tells you exactly what’s there. Call (833) 769-0219 to book one.
Once a year is the standard, and in a wooded neighborhood like Forest Hills it’s worth sticking to. Annual inspections catch cracked tiles, animal nesting, and crown damage before they become structural problems, and they give you a record of the flue’s condition year to year. Call (833) 769-0219 – estimates are free.
Whether you’re dealing with a squirrel nest in the flue, a crown that’s flaking apart, or a cap that never fit right, we can take a look and show you what’s going on with the camera. One company handles the inspection, the cap, the crown, and any liner work that turns up, so you’re not coordinating between contractors. Call (833) 769-0219 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Preston Hollow.