Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Why Preston Hollow Homeowners Choose HeatShield Chimney Cleaning
We provide independent HeatShield chimney cleaning and service in Preston Hollow, and what sets our HeatShield work apart is that we assess the flue itself before we ever reach for the compound. HeatShield is a resurfacing system, not a fireplace brand, so the skill that matters is knowing when a cast-in-place mix will bond to a given flue and when it won’t. In a neighborhood full of multi-chimney estates and stylistic facades, that judgment call decides whether a resurfacing holds or fails.
We’re an independent service provider. Chimney Sweep Preston Hollow is not affiliated with, authorized by, or a dealer for HeatShield. We repair, install, and service HeatShield systems using quality parts that fit them.
Call (833) 769-0219. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Chimney Sweep Preston Hollow for Your HeatShield Chimney Cleaning?
Our technicians have up to 9 years of experience, and a good share of that has been spent on HeatShield jobs: reading a flue, prepping it correctly, and knowing the difference between a surface that will take a resurfacing and one that needs a stainless liner instead. That’s the familiarity you want when someone is working inside your chimney.
HeatShield is a proprietary system. The compound and its mixing ratios aren’t substitutable, so we use the actual HeatShield product for any resurfacing work rather than swapping in generic refractory cement. That practice is part of what keeps your existing warranty intact.
We handle the whole chimney as a system. That means the level 2 inspection that tells us what’s actually inside your flue, the creosote removal that has to happen before any coating goes down, and the crown coating that keeps water from undoing the liner work later. One company, every step. No handoffs between contractors, no finger-pointing when something goes wrong. In Preston Hollow, where a rambling ranch or a European-inspired rebuild can carry several flues and fireplaces, that single-company accountability matters more than it does on a simple one-flue house. We count the flue openings before we arrive, because homeowners often don’t know how many they have.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Fix in Preston Hollow
- Delaminating liner coating shedding flakes. This is the most common HeatShield failure we see: a resurfaced flue installed over an unclean or damp surface starts separating, dropping gray grit and aggregate onto the smoke shelf and firebox floor. The bond never formed properly in the first place, which is why it lets go.
- Crown coating applied too thin or over an already-cracked crown. A HeatShield crown coating that went down thin, or straight over an existing crack, lets water wick behind the coating. The crack reopens and the moisture gets worse, not better. In North Texas, where freeze-thaw cycles work on mortar crowns every winter, this is a routine find.
- Resurfacing compound cracked at the smoke chamber transition. If the original corbel was never parged before coating, the compound cracks right at that transition point. The smoke chamber is where a lot of failures hide, and it’s not visible from the firebox.
- Older HeatShield liners now undersized for the flue load. Some resurfaced liners were sized without accounting for a later fireplace insert or furnace flue tie-in. The result is a flue that restricts draft and causes smoke rollback into the room.
- Coatings hiding moisture damage underneath. Long, humid springs and falls in this part of Texas encourage creosote to glaze and harden, and they also let moisture sit against masonry. A coating that trapped that moisture instead of sealing it out can mask deteriorating clay tile until the tile fails.
A typical job usually starts with a homeowner noticing grit on the firebox floor after each burn. On inspection, the coating is separating because the original flue wasn’t properly cleaned or was damp when the compound went on. A qualified sweep documents the delamination on camera, removes the loose material, and either re-preps and re-coats the flue or recommends a stainless liner if the substrate is too far gone. The crown and smoke chamber get checked at the same time, since the same moisture that wrecked the liner usually cracked the crown too.
HeatShield Parts & Our Repair-vs-Replace Approach
Because HeatShield is proprietary, the compound and its ratios have to be the real product. We use quality parts that fit HeatShield equipment, and we don’t claim to stock or supply genuine HeatShield parts beyond what the resurfacing work itself requires. For any resurfacing job, it’s HeatShield compound, correctly mixed and correctly applied.
That said, HeatShield isn’t the right answer for every flue. Badly spalled or offset flues often need a stainless liner instead, and an honest assessment says so rather than selling a resurface that won’t hold. We make that call on the flue’s own merits, not on what’s easiest to sell. You’ll see the camera evidence yourself before we recommend anything, and we’ll tell you plainly when work can safely wait.
If you’re not sure what your flue needs, call (833) 769-0219. Estimates are free, and the written estimate sets the final price.
Our HeatShield Service Process – Step by Step
- 1
Diagnosis. We start with a level 2 inspection: camera down the flue, checking for delamination, moisture, cracked tile, and how the smoke chamber transition was handled. In Preston Hollow’s rambling ranches and rebuilds, we check every flue, not just the one you called about.
- 2
Prep and repair or install. Creosote removal comes first. Any resurfacing has to go onto a clean, dry flue or the bond fails. Then the HeatShield compound goes down at the correct mix, or we recommend a stainless liner if the substrate won’t take a resurfacing.
- 3
Crown and smoke chamber. We coat the crown if it’s sound enough to coat, and parge the corbel before coating the smoke chamber transition, since a skipped step there is where cracks start.
- 4
Test and document. Camera inspection and a photo report included, so you can see the finished surface and any spots we flagged.
- 5
Warranty-safe handoff. We leave you with documentation of what was done and what to watch for, so future service doesn’t void your HeatShield warranty.
See the difference
Before
After
Before
After
Before
AfterHeatShield Products We Service & Install in Preston Hollow
We install and service the HeatShield Cast-in-Place Flue Liner, both insulated and uninsulated. We apply HeatShield Resurfacing Compound to masonry fireboxes and smoke chambers, install the HeatShield Crown Repair and Crown Coat system, and fit HeatShield custom and multi-flue caps. That cap work matters in Preston Hollow, where expansive, multi-flue rooflines are the norm and water intrusion through an uncapped flue is the leading cause of the crown and liner damage we get called out to fix. One company services all of it: sweep, cap and crown, fireplace repair, inspection, and chimney repair.
We Also Service These Brands
HeatShield isn’t the only professional system we work with. We install and service DuraFlex flexible liner systems for relining jobs, and we use Gelco components for cap and crown work. Working across several professional brands, not just one, means our recommendation comes from what your flue actually needs rather than from a single product line.
FAQs – HeatShield Chimney Cleaning Service in Preston Hollow
No. We’re an independent service provider, not affiliated with, authorized by, or a dealer for HeatShield. We repair, install, and service HeatShield systems and use quality parts that fit them. That independence is exactly why we can tell you when HeatShield is the right call and when it isn’t.
Delamination is the usual cause: the coating went on over a flue that wasn’t fully cleaned or was damp, so the bond never formed and the surface is separating in flakes. The fix starts with camera inspection to confirm how much is loose and whether the substrate underneath is sound enough to re-coat. Call (833) 769-0219 for an exact quote. Estimates are free.
Only if the crown is prepped and the crack is addressed first. Coating straight over a cracked crown lets water wick behind the coating and re-open the crack, which is one of the most common HeatShield crown failures we see in Preston Hollow. If the crown is too far gone, replacement may be the better call. Call (833) 769-0219 to get it looked at.
It can. Resurfacing adds thickness to the inside of the flue, and an older HeatShield liner that was sized without accounting for a later insert can end up restricting draft and causing smoke rollback. We check flue sizing as part of the level 2 inspection so you know what you’re working with before you buy an insert. Call (833) 769-0219 for an exact quote.
Once a year is the standard, and a resurfaced flue deserves a close inspection each time so any early delamination gets caught before it spreads. Long humid springs and glazed creosote in this climate make an annual sweep more important, not less. Call (833) 769-0219 to book your sweep.
Cost depends on how many flues you have, how much creosote is present, and whether the resurfacing needs re-prep or replacement. We don’t quote from a script. A camera inspection and photo report are included so you can see what we see before anything is recommended, and the written estimate sets the final price. Call (833) 769-0219 for an exact quote. Estimates are free.
Not when the work is done correctly with the actual HeatShield product. Using generic refractory cement instead of HeatShield compound is what puts a warranty at risk, which is why we use the real product for any resurfacing. We document what we did so your records stay clean.
Book Your HeatShield Service in Preston Hollow, TX
Whether you need a sweep, a level 2 inspection, crown coating, or a resurfacing that didn’t hold, we can help. Call (833) 769-0219 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Preston Hollow.