Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Preston Hollow?
Chimney cap installation in Preston Hollow typically runs $185 to $575 depending on cap material and how many flues need covering, while a new crown generally falls between $375 and $1,450. Most homeowners here pay somewhere in the $500 to $950 range when a cap and crown are done together in one visit. The written estimate sets the final price, and estimates are free.
A chimney cap is the metal or stainless lid that sits over the flue and keeps rain, birds and squirrels out. The crown is the concrete slab on top of the chimney that sheds water away from the brick. Together they’re the first line of defense against the water damage that ruins masonry from the inside out. If you’re not sure what shape either one is in, an inspection will tell you before anything gets worse.
Key Takeaways:
- Cap and crown work together typically costs $500-$950 in Preston Hollow.
- Caps alone start around $185; crowns alone start around $375.
- Water intrusion from a failed cap or crown is the leading cause of costly chimney repairs.
- Cracked crowns and rusted caps should be addressed before the rainy season, not after.
- Free estimates and written pricing: call (833) 769-0219.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s how the line items stack up for a typical Preston Hollow home. These are estimated ranges, not quotes. What you actually pay depends on the roof pitch, the flue count and the material you choose.
| Line Item | Typical Range | Notes |
|---|---|---|
| Single-flue galvanized cap | $185 – $280 | Basic protection, shortest lifespan |
| Single-flue stainless cap | $245 – $395 | Rust-resistant, holds up to Texas weather |
| Multi-flue custom cap | $395 – $575 | Fabricated to the flue layout |
| Decorative or copper-look cap | $350 – $575 | Higher visual profile on visible rooflines |
| Crown repair (crack sealing, patch) | $375 – $650 | For minor to moderate cracking |
| Crown rebuild | $650 – $1,450 | Haul-off and re-pour on a failing crown |
| Crown wash and sealing | $325 – $575 | Waterproofing on a sound but porous crown |
| Crown and cap together | $500 – $950 | Most common combined scope |
| Inspection to confirm scope | Free estimate | Written estimate sets final price |
What drives the number up: more than one flue, a steep roof pitch that slows the work, a crown that’s broken up enough to need a full rebuild rather than a patch, and premium materials like stainless or copper-look caps. It’s the same story up the road, so a chimney repair pricing guide reads much like this one. What keeps it down: catching a hairline crack before it turns into a rebuild, and choosing a galvanized cap for a flue that isn’t very visible. A standard chimney sweep preston hollow visit is a good moment to have the top of the chimney checked at the same time.
What Affects Chimney Cap & Crown Pricing in Preston Hollow
- Number of flues. A single-flue cap is a straightforward job. A two or three-flue chimney needs a custom cap fabricated to fit the layout, which pushes the price up.
- Roof pitch and access. Many Preston Hollow homes have steep, complex rooflines. More time on the roof and more setup translates to a higher labor figure, and safety on a steep roof is non-negotiable.
- Cap material. Galvanized steel is the budget option and will rust in our humidity. Stainless steel costs more upfront and lasts far longer. Copper-look caps are a style choice for chimneys visible from the street.
- Crown condition. A sound crown that just needs sealing is a much smaller job than one that’s cracked through, which calls for a full rebuild with a fresh concrete pour.
- Material brand. We use Gelco and Famco cap and crown components because the fit and finish are consistent from job to job. Those components cost a little more than hardware-store caps, and they last.
- Weather timing. Scheduling ahead of the fall rains means roofing work happens on dry days, without the scramble that comes when a storm has already pushed water inside the masonry.
It’s worth being clear about what we do and don’t do. We’re a full-service chimney specialist, not a generalist with a brush. Cap and crown work is one of five service categories we cover, alongside sweeping, inspection, fireplace repair and structural chimney repair. That means if the inspection turns up a liner problem under a bad crown, we don’t hand you off to a second contractor. Our technicians have up to 9 years of experience, and they see the whole system, not just the part they were called about.
How to Save on Chimney Cap & Crown
The biggest savings come from timing and from not paying twice for the same diagnosis. A few practical ways to keep the number down:
- Get the inspection first. A free estimate tells you whether the crown needs a patch, a seal or a full rebuild. Guessing at it usually costs more than asking.
- Do the cap and crown together. One visit, one roofline setup, one labor scope. Doing them separately means paying for access twice.
- Fix the crack while it’s small. A hairline crown crack sealed now is a fraction of a rebuild later. Water gets into a crack and works through the masonry from the inside, so the repair only gets bigger.
- Match the cap to the chimney. A stainless cap on a flue everyone can see, a galvanized cap on one nobody sees. You don’t need premium on every flue.
- Deal with flashing at the same time. If water is already getting in around the base of the chimney, address it in the same visit rather than booking a second trip. Chimney flashing repair is often the missing half of a crown job.
None of that is a discount gimmick. It’s just the honest order of operations: inspect, then decide, then do the right scope once. Call (833) 769-0219 for a free estimate and a written price before any work starts.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Preston Hollow?
A single-flue cap runs $185 to $395 in Preston Hollow, and a custom multi-flue cap runs $395 to $575. Stainless caps cost more than galvanized but hold up longer to rain and humidity. Call (833) 769-0219 for an exact quote on your flue layout – estimates are free.
How much does a chimney crown rebuild cost in Preston Hollow?
A full crown rebuild typically costs $650 to $1,450, while a smaller repair or sealing job runs $325 to $650. The difference is whether the crown can be patched or has to be broken out and re-poured. A free estimate will tell you which applies before you commit. Call (833) 769-0219.
Is it cheaper to repair a crown or rebuild it?
Repair is almost always cheaper upfront: $325 to $650 versus $650 to $1,450 for a rebuild. But a badly cracked crown that keeps coming back isn’t actually saving money. If the crack runs through the slab or the mortar bed is failing, a rebuild is the cheaper decision over the long run. Call (833) 769-0219 and we’ll tell you honestly which category you’re in.
Can water damage from a bad cap or crown be prevented?
Yes, and the cost of prevention is a fraction of the repair. A failed cap or crown is the leading source of water intrusion into a chimney, and the damage it causes, from spalling brick to rotted framing, can run into the thousands. Getting a cracked crown sealed for a few hundred dollars now is the cheapest path. Call (833) 769-0219 for a free estimate.
Can you come today for a cap or crown estimate?
Often, yes. Same-day estimates are available depending on the schedule, and the estimate itself is free with a written price before any work begins. Call (833) 769-0219. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday.
Why Homeowners Call a Chimney Specialist for Cap and Crown Work
Your chimney is a system: cap, crown, liner, firebox and flashing all work together. When the crown cracks, water gets into the masonry and finds the liner. When a cap is missing or won’t stay put, squirrels and birds move in and rain soaks the flue. A general handyman can set a cap. Seeing that the cap failure is tied to a crown that’s been leaking for two years takes someone who works on chimneys every week.
We work with professional-grade brands across the whole chimney lifecycle: DuraFlex flexible liner systems for relining, HeatShield for non-invasive flue resurfacing, Gelco and Famco for cap and crown components, and Olympia Chimney and Copperfield for the rest of the system. That matters on a cap and crown job because the cap has to fit the flue the crown sits over. If the inspection turns up a liner problem while we’re up there, we can address it in the same visit rather than referring you elsewhere. If you need a full chimney cap & crown scope done right, that’s exactly what we do.
On the safety side: cap and crown work involves climbing onto a roof, often a steep one, and working at height. This is not a weekend DIY project. A fall off a Preston Hollow roof is a serious injury, and a poorly seated cap can leak worse than no cap at all. Leave the roof work to trained professionals, and ask them to show you the reason for the scope they recommend.
Related Services and Areas
Cap and crown work often goes hand in hand with other chimney repairs. A few pages worth reading if you’re gathering quotes:
- Chimney Sweep Preston Hollow – annual sweeping and the inspection that informs cap and crown scope.
- Chimney inspection – what a proper inspection covers before any estimate.
- Chimney liner replacement – when a failed crown has damaged the flue.
- Chimney leak repair – tracing water intrusion beyond the crown.
- Masonry chimney repair – for brick and mortar damage caused by water.
- Fireplace repair – the firebox side of the system.
- Chimney cap installation – the cap-only job in detail.
- Chimney crown repair – repair and rebuild options.
- Chimney sweep in University Park – a nearby service area.
- Chimney sweep in Highland Park – another nearby service area.
- Chimney repair in Coppell – pricing and scope in a nearby market.
- Chimney cap & crown in Arlington – how the numbers compare in another DFW market.
Get a Free Chimney Cap & Crown Estimate in Preston Hollow
Water intrusion is patient. A cracked crown or a missing cap lets a little rain in every time it storms, and the damage grows quietly behind the brick until it shows up as a leak or a crumbling firebox. The cheapest repair is the one you schedule before the damage spreads. Our technicians across the Dallas area have up to 9 years of experience, and they see this pattern regularly.
Call (833) 769-0219 for a free estimate. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a written price before any work starts, and one company handles the whole job from inspection through completion, so there’s no handoff and no finger-pointing between contractors.
Written by the team at Chimney Sweep Preston Hollow.
Pricing reflects the Preston Hollow market as of 2026. Chimney Sweep Preston Hollow offers free estimates – call (833) 769-0219.
What Our Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Henry Chen"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Aisha Bryant"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Carrie Mercer