Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Preston Hollow?
Chimney repair in Preston Hollow typically runs $350 to $1,800, with most common fixes landing between $450 and $950. Crown repairs and cap replacements sit at the lower end, while liner restoration or partial rebuilds push toward the top of that range. The written estimate you get after an inspection sets the final price, and we provide that estimate free.
We’re Chimney Sweep Preston Hollow, and we handle the whole chimney system – sweep, inspection, cap, crown, firebox, and flue. Our technicians have up to 9 years of experience diagnosing what’s actually wrong before anyone quotes a repair. Call (833) 769-0219. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Repair Cost Breakdown (2026)
Here’s how individual repair items usually price out in the Preston Hollow market. These are typical ranges, not quotes – every chimney is different, and a free inspection tells you which line item applies to yours.
| Repair Item | Typical Cost Range | What It Covers |
|---|---|---|
| Chimney cap replacement | $250 – $550 | Gelco or Famco cap sized to your flue, plus removal of the old cap |
| Crown repair or rebuild | $400 – $1,200 | Crack sealing on minor crown damage up to full crown replacement |
| Flue liner resurfacing (HeatShield) | $650 – $1,400 | Non-invasive resurfacing of a damaged clay flue |
| Full liner relining (DuraFlex) | $1,200 – $2,800 | Flexible stainless liner installed when the existing flue is too far gone |
| Firebox or damper repair | $350 – $900 | Repointing firebox brick, damper replacement, smoke chamber work |
| Mortar crown and flashing work | $300 – $850 | Chase cover repair, flashing reseal where the chimney meets the roof |
| Partial chimney rebuild (above roofline) | $1,800 – $5,500+ | Rebuilding damaged brick courses from the roof up |
What pushes a job toward the higher end? Access is one factor – a chimney on a steep roof pitch or tucked behind a dormer takes more setup. Material choice is another: a full DuraFlex relining job costs more than a HeatShield resurfacing because it’s a different scope of work, not because one is better. And the extent of the damage matters most. Catching a cracked crown early is a few hundred dollars; catching it after years of water intrusion into the chase can mean structural work.
The opposite is also true. A hairline crack in the crown that hasn’t spread, or a damper that just needs adjustment rather than replacement, keeps the repair small. That’s why we inspect before we quote. An inspection catches small cracks before they become structural problems, and it tells you honestly which range you’re in.
What Affects Chimney Repair Pricing in Preston Hollow
- Roof access and pitch. Preston Hollow homes sit on a wide mix of roof styles, from steep pitches on older two-story homes to low-slope runs on ranch layouts. Steeper pitches and complex rooflines mean more time on setup and safety rigging, which affects labor.
- The material system. A cap from Gelco or Famco is a different grade of component than a builder-grade cap, and it lasts differently. We specify professional-grade brands because the material determines how long the repair actually holds. A cheap cap that fails in a few years costs more in the long run than a proper one.
- Liner condition. This is the single biggest variable in chimney repair pricing. A flue with minor cracking can often be resurfaced with HeatShield. One with missing mortar joints or a collapsed section needs DuraFlex relining. The two sit in different price brackets because they solve different problems.
- Water damage history. North Texas rain is hard on masonry, and Preston Hollow’s mature trees drop debris that clogs caps and traps moisture. A chimney that’s been open to the weather for several seasons usually needs crown work and flashing repair alongside whatever else is wrong.
- Chimney age and construction. Preston Hollow has homes from several different building eras, and the construction methods vary. Older masonry chimneys often have thicker mortar joints and different brick; newer factory-built units have their own parts compatibility requirements. Both affect which materials we specify.
- Whether the fireplace is in active use. A chimney that serves a working fireplace needs to meet code for clearances and liner integrity. A decorative-only chimney has a narrower scope. We check the whole system either way – cap, crown, liner, firebox – because they fail in sequence.
How to Save on Chimney Repair
The most reliable way to spend less on chimney repair is to repair it earlier. A cracked crown sealed at the first inspection stays a crown repair. Left alone through a few Dallas rainy seasons, that same crack lets water into the chase and turns into a rebuild. The math favors early intervention every time.
A few practical things that help:
- Get an inspection before the repair quote. You can’t price a repair without knowing the scope. An inspection tells you whether you’re looking at a resurfacing or a relining, and those are very different numbers.
- Fix the cap and crown first if both are failing. Water intrusion is the leading driver of escalation. A properly fitted cap and a sealed crown stop the damage from getting worse while you plan the bigger work.
- Bundle related repairs in one visit. If the crown needs work and the cap needs replacing, doing both in the same appointment saves the overhead of two separate visits. That’s part of why we cover the full chimney lifecycle under one company – you don’t coordinate multiple contractors for one chimney.
- Ask for a written estimate with line items. A quote that says “chimney repair: $1,200” tells you nothing. A line-item estimate shows what’s being replaced and why, so you can decide what’s urgent and what can wait.
- Keep up with regular sweeps. A clean flue reduces creosote buildup – the leading cause of chimney fires – and a sweep is also when small problems get caught. If you need a routine cleaning first, our Chimney Sweep Preston Hollow page explains what that involves.
We offer free estimates, so there’s no cost to finding out what your chimney actually needs. Call (833) 769-0219 and we’ll get an inspection scheduled.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Preston Hollow?
Most chimney repairs in Preston Hollow cost between $350 and $1,800, with the typical job landing around $450 to $950. Cap and crown work sits at the lower end; liner resurfacing and relining push toward the top. Call (833) 769-0219 for a free estimate – the written quote sets the exact price.
Is it cheaper to repair or replace a chimney liner?
Resurfacing with HeatShield is usually cheaper than full relining – typically $650 to $1,400 versus $1,200 to $2,800 with DuraFlex. But resurfacing only works if the existing flue is structurally sound enough to hold the coating. If the clay liner is badly deteriorated, relining is the option that lasts. An inspection tells you which applies. Call (833) 769-0219 to book one.
Can chimney repair be done the same day I call?
Many common repairs can be scheduled same-day depending on the part needed and the current schedule. Fast dispatch from 7am to 7pm, Sunday through Friday, means a technician can often reach you the same day you call. Larger jobs like full relining or a partial rebuild are usually booked for a separate appointment. Call (833) 769-0219 to find out what’s available.
Does chimney repair cost more if the chimney is on a steep roof?
Yes, roof access affects labor, and complex or steep rooflines in Preston Hollow can add to the labor portion of a repair quote. That’s a setup and safety cost, not a markup on the work itself. The written estimate breaks it out so you can see what you’re paying for. Call (833) 769-0219 for a free estimate.
What’s the most expensive chimney repair?
A partial or full chimney rebuild is the most expensive repair, typically $1,800 to $5,500 or more depending on how many courses of brick need replacing. It’s also the one most preventable – most rebuilds trace back to years of unresolved water intrusion through a failed crown or open flue. Crown and cap repair early is the cheapest insurance against it. Call (833) 769-0219 for an inspection before small damage becomes structural.
Why We Quote the Way We Do
Chimney pricing varies widely because the scope varies widely. A chimney is a system – cap, crown, liner, firebox – and each component fails on its own timeline. When we quote a repair, we’re looking at the whole system, not just the part you noticed. That’s why our estimates are line-itemed: so you can see exactly which component is driving the cost and decide what to fix now and what to plan for.
We work with a curated roster of professional-grade brands – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – because the material determines how long a repair holds. HeatShield is the industry’s leading flue resurfacing system for non-invasive liner restoration, and DuraFlex flexible liner systems are what we specify for full relining. Not every local chimney company offers both; many sweep-only operations have to turn away damaged flue work entirely because they don’t carry the materials or the training. We do both, so you’re not handed off mid-job.
Single-company accountability matters for chimney work. If one contractor installs a cap and another repairs the crown, and water still gets in, nobody owns the problem. We inspect, quote, and repair – one company, every step. That’s true whether the job is a $350 damper repair or a $2,800 relining. For a deeper look at what structural repair involves beyond pricing, see our chimney repair page.
When to Call for Chimney Repair
Some chimney problems are obvious – a cap that’s blown off, visible cracks in the crown from the ground, water staining on the firebox walls. Others aren’t. A liner with early-stage cracking looks fine from the outside; a firebox with deteriorating mortar joints holds together until it doesn’t. The best way to know is an inspection, and the best time to inspect is before you need a repair, not after.
If you’re seeing any of these, it’s worth a call:
- Water stains or rust inside the firebox or on the damper
- Visible cracks in the chimney crown or missing mortar between brick courses
- A cap that’s loose, rusted through, or missing
- Smoke rolling back into the room when the fireplace is lit
- A strong creosote smell even when the fireplace isn’t in use
Any of these can indicate a repair that’s cheaper now than it will be in a year. Call (833) 769-0219. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday. If you call outside dispatch hours, we’ll book you into the next opening – Sunday through Friday, 7am to 7pm.
Contact Us for a Free Chimney Repair Estimate
We give free estimates on every chimney repair, and we quote per job based on what the inspection finds – no flat service-call fee, no surprise charges. If your chimney needs a new cap, a crown repair, a liner resurfacing, or a full relining, we’ll tell you which one and what it costs before any work begins. Call (833) 769-0219 for your free estimate. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, means we can often get a technician out the same day you call.
Pricing reflects the Preston Hollow market as of 2026. Chimney Sweep Preston Hollow offers free estimates – call (833) 769-0219.
Written by the team at Chimney Sweep Preston Hollow.
What Our Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Henry Chen"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Aisha Bryant"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Carrie Mercer